Configuring DSP Templates
The DSP Template determines the coders that can be used by the device and various other functionalities. For a list of DSP templates and the maximum number of channels supported by each coder, see Channel Capacity. You can select a single DSP Template.
|
●
|
If you do not configure a DSP template, the device uses the default DSP template (i.e., Template 0). |
The following procedure describes how to configure a DSP template through the Web interface. You can also configure it through ini file [DSPVersionTemplateNumber] or CLI (configure voip > media settings > DSP-version-template-number).
|
➢
|
To select a DSP Template: |
|
1.
|
Open the Media Settings page (Setup menu > Signaling & Media tab > Media folder > Media Settings).
|
|
2.
|
In the 'DSP Version Template Number' field, enter the required DSP Template number.
|
|
3.
|
Click Apply, and then restart the device with a save-to-flash for your settings to take effect.
|